Adimar professional has ideal characteristics for laying ceramic tiles with a medium-high degree of absorption (>5%) on conventional cement-based substrates in interior and exterior floor and wall coverings. Not suitable for exterior coverings.

• Preparation of the substrate: the substrate on which the application is to be carried out must be resistant, dry, level, free of dust and free of any traces of release agent.
• Preparation of the mixture: add 7-7.5 l of water per bag and mix manually or mechanically, with a low speed electric mixer, to eliminate any possible presence of lumps in the paste, let the mixture stand for 5 min and carry out a brief re-mixing.

• The application temperature must be between 5 °C and 35 °C on the substrate.
• Do not apply on substrates with residual humidity > 5%.
• Check the planimetry of the substrate with a 2 m ruler, verifying that the deviations must be less than 5 mm. In the case of superior deviations it is necessary to regularize them before the placement.
• Do not use in areas where there is danger of stagnant water.
• It is advisable to leave a minimum joint between tiles of 2mm applying in it the UNIVERSAL JOINT 0/15 or the TECHNICAL JOINT 0/16.
• On very absorbent substrates it is advisable to moisten it and wait until it is dry.
• To make a double gluing in pieces superior to 900 cm2 or in exterior pavements.
• With white body tiles use Adimar porcelain white, Adimar flexible or Adimar superflex.