• With ADIPOXINET we can remove epoxy residues during the application process and while these residues are still fresh.
• ADIPOXINET is a very specialized product that helps to emulsify the epoxy residues with WATER and in this way proceed to its complete elimination.
• It is especially useful during the application and cleaning of ADIPOXI in WHITE color, as it is the most difficult color to emulsify with water.
• It can be used in pavements, coatings, both INDOORS and EXTERIORS and in swimming pools.
• It can be used to clean all the scouring pads, trowels, beaters, etc. used during the application of the epoxy joint.

• ADIPOXINET can be used pure or diluted at a 3:1 ratio with water: 3 parts of ADIPOXINET + 1 part of tap water.
• Add in a bucket for example: 5 lts of ADIPOXINET + 1.5 lts maximum of tap water and mix lightly for 30 seconds. Set this mixture aside.
• After 10-15 minutes from the application of the ADIPOXINET, proceed to remove all the residues using a white Scotch-Brite pad soaked with the previous mixture.
• Then collect the remaining liquid with a sponge.
• Finally, we can rinse the entire surface with running water.

ADIPOXINET should not be applied:

• To remove DRY remains of epoxy (consult).
• Without using the basic precautions required by a chemical product: use rubber gloves and protective goggles.

• Type: cleaner with organic esters.
• Density: 1.02 g/cm3
• Flammability / Toxicity: Yes / irritant, avoid contact with skin and eyes; if contact occurs, clean with water.
• Precautions: Do not swallow; wear gloves and goggles; keep out of reach of children; in case of contact with eyes, flush with water and consult a physician; keep away from heat and sparks.
• PROPORTION OF THE MIXTURE: from pure to reduced 3:1 with water.
• PRESENTATION: 5 lt. drums.