The Fast ' Easy Dry Formigó is a concrete developed for the fast placement and sealing of pivots, signals, stakes, fence poles, banks, fencers and pergolas, as well as for the realization of small barbecue foundations, garden workshops or fence walls in the area of single-family or private housing, both inside and outside.

Media preparation: The terrain where the application will be performed must be compact enough that there will be no detachments during the performance of the orifice or during the application of the dust in it. Perform an orifice of about 3 times the diameter of the pall to be anchored and with a depth that ensures the insertion of half the height of the pole in order to perform a stable application. Humidate the walls and the bottom of the hole well before applying the dust.
Preparing and applying mixing: Prepare between 3.4 and 4 litres of water per sack to apply. Adding water to the bottom of the hole, focusing the object well on fixing the hole adds dust up to about 1/4 the depth of the hole water until the dust is saturated, pouring the rest of the dry dust uniformly across the hole and adding the rest of the water. You will have approximately 5 minutes to correct the position of the fixed object. Make applications that do not exceed 20 cm depth to ensure that water pours all of concrete. Once the application is finished it can be floated or smoothed with a plane. The material will start to harden at 20 minutes from application.

Do not apply at temperatures below 5 niC or above 35 .C.
The amount of water required will depend on the type of terrain and atmospheric conditions.
If applied, it will require several layers to leave the surface of the rough bottom layer.
Avoid frost and strong winds.
The addition of another material (additives, cement, etc.) can change the behaviour and characteristics of the product.
Clean up tools with water while the product is fresh