Fixmar Primer GR
Primer and adhesion promoter based on acrylic polymers with low emission of volatile organic substances. Ready for use in interiors and exteriors, with inert fillers that gives it a textured surface.
- Application field
- Instructions of use
- Recomendations of use
- The adhesion promoter FIXMAR PRIMER GR is ideal for improving the adhesion of any type of plaster or plastering on concrete, brick, light blocks or plaster also on non-absorbent substrates such as ceramic floors. On walls and floors, both exterior and interior.
- In porous floors of cement, anhydrite or sanded floors FIXMAR PRIMER GR primer acts as a fixer of dust residues facilitating the proper adhesion of a self-leveling mortar. It also acts as a pore filler.
- Surface preparation: Surfaces must be clean, dry, cured, free of oil or grease and detachable residues. It is not necessary to wet the substrate before application.
- Application of the primer: Shake before use and apply on the surface by brush or roller. After the waiting time can proceed to the application of the plaster, plastering or self-leveling mortar.
- Apply in temperatures on the support between 5⁰ and 35⁰.
- Protect from frost.
- Do not use FIXMAR PRIMER GR in the presence of water.
- Clean tools with water after application of the primer.
- It is possible to apply a second coat of FIXMAR PRIMER GR even when a long period of time has elapsed since the first application.
- On porous or absorbent substrates it can be diluted with water up to 20%.
- The waiting time before applying the plaster, plastering or self-leveling mortar is 15 to 60 minutes depending on the support and weather conditions.
