Fixmar Primer GR
Primer and adhesion promoter based on acrylic polymers with low emission of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface.
- Application field
- Instructions of use
- Recomendations of use
- FIXMAR PRIMER GR adhesion promoter is ideal for improving the adhesion of any type of plaster or render on concrete, brick, light blocks or gypsum substrates, also on non-absorbent substrates such as ceramic floors. On walls and floors, both exterior and interior.
- On porous cement, anhydrite or sanded floors, FIXMAR PRIMER GR primer acts as a fixative for dust residues, facilitating the correct adherence of a self-levelling mortar. It also acts as a pore filler.
- Substrate preparation: Surfaces must be clean, dry, cured, free of oil or grease, and free of any detachable residues. It is not necessary to wet the substrate before application.
- Application of the primer: Shake before use and apply to the surface by brush or roller. After the waiting time the plaster, render or self-levelling mortar can be applied.
- Apply at substrate temperatures between 5⁰ and 35⁰.
- Protect from frost.
- Do not use FIXMAR PRIMER GR in the presence of water.
- Clean tools with water after application of the primer.
- It is possible to apply a second coat of FIXMAR PRIMER GR even if a long period of time has elapsed since the first application.
- On porous or absorbent substrates it can be thinned with water up to 20%.
- The waiting time before applying the render, plaster or self-levelling mortar is 15 to 60 minutes depending on the substrate and atmospheric conditions.
